What can we help you with?
< All Topics
Print

Taylor 111

User Guide to Pixie Classroom

Operations (steps numbered on the pixie image included)

  1. Press the ON button on the white Pixie control panel. This will lower the screen and turn the projector ON.
    ***The projector will need time to warm up
  2. Select the device you will be working with using the center section of the Pixie control panel to have your chosen device screen appear.
    *You may need to toggle between devices to get your select device to appear.
    *For an external device, use the courtesy cables located on the side of the cabinet with corresponding labels.
    ***DO NOT plug your device in anywhere else or alter existing connections
  3. Adjust the volume by using the controls on the left-hand section of the Pixie control panel.
  4. Press the OFF button when finished using the space to raise the screen and turn OFF the projector.
  5. There is much more to write about this room, and I need an additional Pixie picture. Not sure when that will get done
Table of Contents