Hey, what answers do you need?
< All Topics
Print

Controlling Camera in a Partially Upgraded Classroom

Cameras and Locations

Camera 1 – Facing the Front of the Classroom
Image of Camera 1 mounted on the ceiling
Image of Camera 1 mounted on the ceiling
Camera 2 – Facing the Students
Image of Camera 2 mounted on the wall at the front of the classroom
Image of Camera 2 mounted on the wall at the front of the classroom

Presets for Camera 1 (facing the front of the classroom)

Preset 1: Teaching Station
Image of preset 1 pointing at the teaching station
Image of preset 1 pointing at the teaching station
Preset 2: Projector Screen Zoomed IN
Image of preset 2 zoomed in on the projector screen
Image of preset 2 zoomed in on the projector screen
Preset 3: Projector and Teaching Station Zoomed OUT
Image of preset 3 zoomed out to include the projector and teaching station
Image of preset 3 zoomed out to include the projector and teaching station
Preset 4: Chalkboard/Writing Surface (if possible)
Image of preset 4 chalkboard/writing surface
Image of preset 4 chalkboard/writing surface

Preset for Camera 2 (facing the students)

Preset 1: Middle of Classroom
Image of preset 1 the middle of the classroom
Image of preset 1 the middle of the classroom
Preset 2: Left Side of the Classroom
Image of the preset 2 left side of the classroom
Image of the preset 2 left side of the classroom
Preset 3: Right Side of the Classroom
Image of the preset 3 right side of the classroom
Image of the preset 3 right side of the classroom
Preset 4: Middle of Classroom Zoomed OUT
Image of the preset 4 middle of the classroom zoomed out
Image of the preset 4 middle of the classroom zoomed out

Using the Remote Control

USE THE REMOTE CONTROL TO CHANGE THE CAMERA PRESETS

Accessing the camera presets using the remote
  1. Point the remote control at the camera you want to move. 
  2. Press the top number that corresponds to that camera (CAMERA SELECT 1 or 2). The green light on the camera should flash.
  3. Press the number 1, 2, 3, or 4 on the keypad below to change the camera preset. The presets are the same across campus. 
Image of the camera remote control with the location of Camera select and the numbers highlighted
Image of the camera remote control with the location of Camera select and the numbers highlighted
Moving the camera directly using the remote control
  1. Point the remote control at camera you want to move. 
  2. Press the top number that corresponds to that camera (CAMERA SELECT 1 or 2). The green light on the camera should flash.
  3. Use the Zoom button to zoom in and out.  Press “+” to zoom in and “-” to zoom out.
  4. Use the arrow keys around the “Home” button to pan the camera left and right or move it up and down.
Image of the Camera select on the remote and the arrows at the bottom of the remote to control angle
Image of the Camera select on the remote and the arrows at the bottom of the remote to control angle
Previous Atlona controls
Next Controlling Cameras in a Fully Upgraded Classroom
Table of Contents